Technical Experiences

Junior Site Engineer – Coinford Construction Ltd, UK (July, 2018- till date)

I carry out Site engineering survey in conjunction with the other Site engineers on the project site. My responsibilities are listed below:

Read and interpolate structural/architectural drawings.

Establish site control stations and set out using Leica/Sokkia instrumentation.

Developing good understanding and interpolation of engineer and architects drawings.

Transfer details from drawings to setting out in the field accurately and clearly.

Inspect and raise/rectify quality actions prior to concrete pours, backfill of drainage and other services in conjunction with other Site engineers.

I use key software such as Microsoft suite, AutoCAD and Adobe pdf packages for Drawings, Designs Details and As-built computation.

Carry out take-off of quantities for site ordering in conjunction with other Site engineers.

Read and understand Reinforcement drawings, ensure standard rebar call-off procedure/methods.

Good attitude and able to work as part of a team, reporting to the Site Project engineer.

Construction Worker – Chartway Group & MHS Homes, Rochester, Kent, U.K(June, 2018)

I carry out the construction works based on instructions by the site manager especially in the area of mechanical and electrical services installation on the residential buildings.

Construction Worker – MBM Landscapes Ltd & Keepmoat Homes, Isle of Sheppey, Kent, U.K (June, 2018)

I and other team members filled the floor with top soil, laid the grasses, planted the trees and the flowers around the residential building landscapes and also had them sprinkled with the water sprinkler to keep them alive.

Volunteer Site Supervisor – Fort Amherst Heritage Trust, Medway, Kent, U.K (Jan 2018 – till date)

The Trust in partnership with Medway Council is constructing a new edifice within the Historic Fort Amherst around the canal. We began the demolition of existing porta cabins, toilets, falling of trees and other works and the next stage is for the full construction works. I volunteer on Saturdays for this project.

Volunteer Construction Worker – Medway Queen Ship Rehabilitation, Gillingham, U.K (May 2018 – till date)

I volunteer as a carpenter and woodworker and welder for the reconstruction and rehabilitation of Medway Queen Ship that has been existing for years now.

I also work with veteran Naval Officers and we relate construction wise as a form of construction meetings to proffer solution to the construction and engineering works within the scope of the ship rehabilitation.

Federal Ministry of Transport, Nigeria  (Jan. 201ct.,2017)

Site Resident Supervisor/Engineer

  • Management of a team of 6-10 junior engineers at project Sites.
  • Coordination of team and site meetings alongside other senior professionals.
  • Carry out preliminary surveys and investigation on all mechanical engineering-related project activities.
  • Perusal of architectural, mechanical engineering services and other technical service designs.
  • Prepare cost estimates and tender documents in respect of projects to be carried out (either by contract or direct labour).
  • Supervise work being carried out either by contract or direct labour. Projects under my purview during this period includes; but not limited to:

–  Supervision of the New International Terminal Building Project by China Civil Engineering Construction Company (CCECC) at Murtala Muhammed International Airport(MMIA), Lagos.

 

Federal Ministry of Aviation, Nigeria  (Jan. 2012 – Jan. 2015)

Site Engineer/Procurement Administration Trainee

  • Carry out preliminary surveys and investigation on all Mechanical Engineering-related Project activities.
  • Perusal of Architectural, mechanical engineering services and other technical service designs.
  • Prepare cost estimates and Tender documents in respect of projects to be carried out (either by contract or direct labour).
  • Supervise work being carried out either by contract or direct labour. Projects under my purview during this period includes; but not limited to:
    1. Monitoring and Evaluation of Procurement Administered Ministry’s Projects.
    2.  Supervision of the Rehabilitation and Remodelling of Ibadan Airport, Ibadan Project
    3.  Supervision of the Rehabilitation and Remodelling of Nnamdi Azikiwe International Airport, Abuja Project; (a) Terminal C of the Intl Airport Wing (b) General Aviation Terminal/Pilgrims Terminal (c)Airport Road Construction
    4.  Supervision of the Rehabilitation and Remodelling of Murtala Muhammed Intl & Local Airport, Lagos Project;
      • Intl Wing; D & E Wing Projects (Remodelling and Expansion)
      • Existing Terminals Interior Design, Remodelling and Upgrade
      • Ticketing area (Renovation & Expansion)
      • New Passenger Terminal
      • New International Airport
      • Aviation Rescue Centre
      • Aviation Hangar and 15 other Projects at Lagos Airport

5. Commencement of Projects and Supervision of the New International Terminal Building Project by China Civil Engineering Construction Company (CCECC) at MMIA, Lagos.

6. Monitoring and Evaluation of the Rehabilitation and Remodeling of Benin Airport, Benin Project;  (a) General Aviation Terminal    (b) Existing Terminals Interior Design, Remodelling and Upgrade.

       

FOBAC Equipment Manufacturing Company, Nigeria (March – Oct. 2008)

Industrial Trainee (Fabrication and Polythene Productions)

  • As a Trainee Engineer, I watched and participated in the production of  raw materials and polythene using the Extruder and the production flow system.
  • At the Steel fabrication section, I learnt the welding basics and other steel composition and production methods. The equipment produced included Medical Beds, Chairs, Office furniture and cabinets etc.

     

SEGETO Motors, Nigeria (Automobile Services and Repair) (July – October, 2007)

Automobile Servicing and Repair Trainee

As a Trainee Engineer, I learnt the practical applications of servicing, repairing and complete overhauling of automobiles. I was also able to discover the important mechanical parts such as the Block of the Automobile engines and the compositions such as the Pistons, etc, the Propeller, the Exhaust and the Gear as well as learnt about their importance and functions in the Automobile system.